Продукция
IMG STAGELINE
MONACOR
Решения
Аудиорешения на все случаи жизни
Аудио по IP
Наши дилеры
Наши работы
Новости
Контакты
Стать дилером
Войти
0
RUR
0
Поиск
Главная
Каталог
Архив
Системы безопасности
Видеонаблюдение
Аксессуары для камер
5%
по цене
по имени
по новизне
1
2
3
ADM-01
Camera mount,
for 3 megapixel network mini colour dome camera D-4320.
For wall mounting or ceiling suspension
Inside cable routing
Aluminium version
Размеры: диам. 110 мм x 36 мм
Supplied with mounting accessories
ADM-03
Wall bracket,
for 2 megapixel network colour dome camera D-8220.
Inside cable routing
Aluminium version
Размеры: диам. 200 мм x 127 мм
Supplied with mounting accessories
ADM-04
Wall bracket,
for 3 megapixel network mini colour dome camera D-4320 and holder ADM-01.
Sheet steet version
Размеры: диам. 110 мм x 30 мм
Supplied with mounting accessories
AHVB-240BNC
Surge protector,
for AHD, TVI and CVI applications.
For video coaxial cables
Response time: < 1 ns
Max. surge voltage: 4 kV
Металлический корпус
BNC connectors
With 40 см ground wire
Размеры: 25 x 25 x 75 мм
In order to allow for a perfect protection, one surge protector module must be fitted to each end of the cable.
AP-24A3
Power supply,
~
24 V,
for indoor applications.
Suitable for EPN-4220I
Primary:
~
230 V/50 Гц/100 VA
Secondary:
~
24 V/3 A
Размеры: 79 x 68 x 101 мм
Bec: 1.2 кг
AXDA-102HD
Video distributor,
for high-resolution AHD, CVI, TVI video signals (1080p/720p).
1 input to 2 outputs
BNC connections
Power LED
Power is provided via enclosed power supply
Размеры: 58 x 42 x 49 мм
Bec: 55 g
AXDA-104HD
Video distributor,
for high-resolution AHD, CVI, TVI video signals (1080p/720p).
1 input to 4 outputs
BNC connections
Power LED
Power is provided via enclosed power supply
Размеры: 138 x 29 x 86 мм
Bec: 120 g
AXH-B
Camera mount,
for HYBRID Line colour camera AXC-2036DF or AXC-2036BF.
For wall mounting and ceiling suspension
Inside cable routing
Aluminium version
Размеры: диам. 155 мм x 40 мм
Supplied with mounting accessories
AXOC-201
2-channel one-cable transmission set
Camera signals: AHD, CVI, TVI, CVBS
Resolution: 1080p
Cable length: 3-100 m (RG59)
Scope of delivery: 1 transmitter module, 1 receiver module
Transmitter module/receiver module:
Connections: BNC jacks, low-voltage jack
LED status indicator
Power supply: DC 12 V/1 A via optional power supply (PSS-1210DC)
Admissible ambient temperature: -30 град.C to + 50 град.C
Размеры: 64 x 24 x 80 мм
Bec: 70 g
AXS-100
Single-cable transmission system,
for distances up to 600 m (cable type: RG-59).
Consisting of 1 transmitter, 1 receiver as well as 1 power supply with connection cable
Video transmisison: AHD 720p/1080p and CVBS
Suitable for cameras of the AXS series
Power is provided via enclosed power supply DC 48 V/1.25 A
LED function display
Admissible ambient temperature: -10 град.C to +45 град.C
AXTU-102VPD
Passive 2-wire transmission set,
for AHD/TVI video signals and CVBS video signals.
For TVI signals up to 150 m, for AHD signals up to 50 m and for CVBS signals up to 100 m
For twisted telephone cables and Cat. 5 network cables
For free cable pairs in existing installations
Cable connection via screw terminals
BNC plug for transmitter and receiver
Passive, no power supply required
AZM-01
Camera mount,
for megapixel network colour cameras B-6210, B-6220 and D-6210.
For wall mounting and ceiling suspension
Inside cable routing
Aluminium version with supplied steel sheet for mounting
Размеры: диам. 119 мм x 39 мм
Supplied with mounting accessories
BA-EHN
Wall mount bracket
Suitable for network dome cameras EDN-3260 and EHN-3260
Steel version
Load: 10 кг
Размеры: 150 x 130 x 180 мм
Supplied with mounting accessories for wall mounting
CCTV-LABL/IS
Sticker "SECURITY", adheres to the inside
Size: 120 x 80 мм
Material: PVC film
Resistance to weathering and light: 2 years
Adhesive strength: 2 years
CCTV-LABL/OS
Sticker "SECURITY", adheres to the outside
Size: 120 x 80 мм
Material: PVC film
Resistance to weathering and light: 2 years
Adhesive strength: 2 years
ECM-30A
Microphone module,
for subsequent audio upgrading of video surveillance systems.
Audio amplifier and electret microphone cartridge (диам. 10 мм x 7 мм), cardioid polar pattern
Power supply: DC 12 V/10 mA
Audio output and power supply via wire connections with bare cable ends
EKB-500
Universal control panel,
with joystick and jog shuttle, for operating speed dome cameras of the EPTZ series.
Cable-connected operation of several devices
3-axis joystick
Jog shuttle for easy control of the digital recorders
Protocols: Pelco P, Pelco D and EverFocus
LCD (20 characters x 2 lines)
Multilingual menu (GB, D, F, I)
Password protection
Interfaces: 1 x RS-232, 2 x RS-485
Power is provided via enclosed power supply
Размеры: 360 x 95 x 200 мм
Bec: 1.5 кг
EPTZ-CLM
Suspended ceiling mount
Suitable for EPN-4220 and EPN-4220I
Length: 340 мм
Steel, powder-coated
EPTZ-CNM
Corner mount adapter
Suitable for wall bracket EPTZ-WMB
For mounting the camera into corners
Stainless steel
EPTZ-ICMB
Flush-mount ceiling adapter
Suitable for EPN-4220I
Ceiling cutout: диам. 200 мм
Размеры: диам. 220 мм x 130 мм
Steel version
EPTZ-PBA
Adapter plate,
for mounting EPTZ-PBOX onto EPTZ-PLM (pole mounting) or onto EPTZ-CNM (corner mounting).
EPTZ-PBOX
Junction box with 24 V power supply
Especially designed for high-speed dome camera EPN-4220.
Vandal-resistant diecast metal outdoor housing (IP66)
Threaded bushings and facility for cable routing inside the housing cover for directly mounting wall holder EPTZ-WMB
24 V power supply cable with low-voltage plug диам. 5.5 мм
Robust cover hinge, thus possible to open when camera is mounted
Switch to neutral via built-in mains switch inside the housing for a safe installation
Connection for RS-485, alarm contact and mains via screwless terminal
Separate mounting possible, supplied with blank covers for cable inlet
EPTZ-PLM
Pole mount bracket
Suitable for EPTZ-WMB
For pole diameter: диам. 90-155 мм
Stainless steel
EPTZ-WMB
Wall mount bracket
Suitable for EPN-4220 and EPN-4220I
Length: 270 мм
Diecast aluminium, powder-coated
HDAW-203
HDMI audio splitter
HDAW-203 modulates/demodulates an audio signal to the HDMI signal. Thus, it allows to embed a remote audio source via an existing HDMI connection or to de-embed an existing audio signal. The audio source is selected via a supplied remote control.
1 x HDMI input, 1 x HDMI output
1 x RCA input L/R, 1 x RCA output L/R, switchable
1 x coaxial input, 1 x coaxial output, switchable
1 x optical input, 1 x optical output
Supported video resolution: VGA, 720p, 1080p up to 4K
Power is provided via enclosed plug-in power supply
Размеры: 140 x 23 x 71 мм
Bec: 225 g
HDDIST-104
4-way splitter,
for splitting one video signal to four HD-SDI terminal devices.
Input: 1 x BNC jack
Outputs: 4 x BNC jack
LED indication for power and HD-SDI signal
Power supply via supplied power supply unit
Размеры: 88 x 30 x 75 мм
Bec: 300 g
HDMA-220WL
Wireless transmission set, 5.8 GГц,
for HDMI signals.
Resolutions: 1080p, 1080i, 720p, 480p, 480i
Operating range: approx. 20-30 m indoors, up to 100 m outdoors (visual contact)
Supports remote control of connected HDMI device (infrared forwarding)
Scope of delivery: 1 transmitter module, 1 receiver module, 2 plug-in power supplies, 1 infrared transmitter unit, 1 infrared receiver unit
Transmitter module/receiver module:
Connections: HDMI jack, low-voltage jack, connection for infrared unit
Reset switch
Power is provided via enclosed plug-in power supply
Размеры: 195 x 31 x 104 мм (w/o antenna)
Bec: 540 g
Licence-free in the EU.
HDRCA-100CON
HDMI/composite converter,
for converting a digital HDMI signal into an analogue component AV signal.
Input: 1 x 19-pole HDMI jack
Outputs: 3 x RCA (video, audio L, audio R)
PAL/NTSC selector switch
Металлический корпус with mounting flange
Supplied with mounting accessories
Admissible ambient temperature: 0-40 град.C
Power is provided via enclosed plug-in power supply
Размеры: 67 x 27 x 110 мм
Bec: 165 g
HDTVI-100CON
HD-TVI converter,
for parallel conversion of one HD-TVI video signal to a HDMI connection, a VGA connection and a composite video connection, e.g. for connecting one HD-TVI camera to three monitors.
Input: 1 x HD-TVI
Outputs: 1 x HDMI, 1 x VGA, 1 x composite video
Adjustable resolution
LED for indicating operating status, HD-TVI signal and HDMI output
Supplied with mounting accessories
Power supply via supplied plug-in power adapter
Applications
With this converter, it is possible to convert a TVI video signal from a camera, for example, into a HDMI signal, VGA signal and CVBS signal in order to display it on a monitor or TV set. The CVBS output jack can alternatively be used as a TVI feed-through output or as a second input for another TVI signal. With two input signals, a picture-in-picture display is possible.
HDVB-240BNC
Surge protector,
for HD-SDI applications.
For video coaxial cables
Response time: < 1 ns
Max. surge voltage: 8 kV
Металлический корпус
BNC connectors
With 40 см ground wire
Размеры: 25x25x68 мм
In order to allow for a perfect protection, one surge protector module must be fitted to each end of the cable.
×
Автозвук
Аудио
Динамики
Кабельная продукция
Комплектующие
Микрофоны
Профессиональный звук
Разъемы
Световое оборудование
Сделай сам
Системы безопасности
Системы оповещения
Активные трибуны
Измерительные приборы
Конференц системы
Мегафоны
Наушники
Портативные акустические системы
Поясные громкоговорители
Проигрыватели и рекордеры
Прайс раздела
Общий прайс скачать
Оставить заявку
18 апреля 2024
14
:
08
Заказать обратный звонок
Оставьте ваш телефон и мы Вам перезвоним
Ваше имя:
Ваш телефон:
Обратный звонок осуществляется только на телефоны местной телефонной сети.