NAC-3MPA1
NEUTRIK POWERCON panel jack
  • For mains connection up to ~ 250 V/20 A
  • Version for mains input
  • Connections for ground, phase and neutral conductor
  • Self-extinguishing according to UL 94V-0
NAC-3MPB1
NEUTRIK POWERCON panel jack
  • For mains connection up to ~ 250 V/20 A
  • Version for mains output
  • Connections for ground, phase and neutral conductor
  • Self-extinguishing according to UL 94V-0
NAC-3MPHC
NEUTRIK POWERCON panel jack
  • For mains connection with a high power rating of up to ~ 250 V/32 A
  • Screw connections for ground, phase and neutral connector
  • For cable cores: 2.5-6 мм2
NAC-3MPX
NEUTRIK POWERCON True1 panel plug
  • Complies with safety requirements of IEC 60320, VDE-certified
  • For mains connection up to ~250 V/16 A
  • Connections for ground, phase and neutral conductor, connector can be connected under load
  • Self-extinguishing accoding to UL 94V-0
NAC-3MXW
NEUTRIK POWERCON True1 plug
  • Complies with the safety requirements of IEC 60320, VDE-certified
  • For mains connection up to ~250 V/16 A
  • Connections for ground, phase and neutral conductor, connector can be connected under load
  • Robust version with latching device and cable inlet with self-adjusting clamps
  • Self-extinguishing accoding to UL 94V-0
  • Protection class IP65
ODP-34AC/10
Mains extension cable
  • Fitted with screwable 3-pole plug and 3-pole inline jack
  • Cable specification: H05VV-F3Gx2.5мм2
ODP-34AC
Mains extension cable, IP67,
suitable for LED spotlights, e.g. ODW-2410RGBW, ODC-100/RGB.
  • Fitted with screwable 3-pole plug and 3-pole inline jack
  • Cable specification: H05VV-F3G x 2.5мм2
  • Length: 2 m
RCCE-13001
Remote-controlled switch sockets, set of 3
For conveniently switching electrical appliances and lights up to 1,000 W on or off, even through walls. The receiver sockets are simply connected between mains socket and the appliance to be switched. The power is supplied via the existing mains socket.
  • Frequency: 433.92 MГц
  • Operating range: up to 25 m
  • Child safety sockets
  • Power rating: up to 1,000 W per socket
  • Switching status indicator at the receiver, can also be operated manually
  • Easy and flexible use due to self-learning coding
  • Fail-safe due to more than 65,000 different codes
  • Permanent storage of coding, even in case of a prolonged power failure
  • 4-channel hand-held transmitter for universal control of individual receivers or multiple receivers at the same time
  • Matching 3 V replacement battery CR-2032 is available at option
SPA-135
Surge protector,
for electronic devices connected to the 230 V mains.
  • Protection against current peaks up to 13.5 kA
  • Protects phase, neutral conductor and protective conductor
  • Child safety socket
  • Function indicator
  • Connected load: ~ 230 V/50 Гц/3,500 VA
T-252J
Low-voltage panel jack,
with switching contact, NC.

T-252J = 5.5/2.1 мм
T-253J = 5.5/2.5 мм
T-252
Plugs for power supply,
2 poles, coaxial.
T-252 = 5.5/2.1 мм
T-253 = 5.5/2.5 мм
T-253
Plugs for power supply,
2 poles, coaxial.
T-252 = 5.5/2.1 мм
T-253 = 5.5/2.5 мм
T-321
Low-voltage panel jack
  • Switching contact, NC
  • With mounting flange
  • 5.5/2.1 мм
T-421
Low-voltage panel jacks
  • Central fixing for 8 мм drill hole
  • With switching contact
  • Length: 21 мм

T-421 = 5.5/2.1 мм
T-425 = 5.5/2.5 мм
T-425
Low-voltage panel jacks
  • Central fixing for 8 мм drill hole
  • With switching contact
  • Length: 21 мм

T-421 = 5.5/2.1 мм
T-425 = 5.5/2.5 мм
T-521AP
Plugs for power supply, right-angle,
2 poles, coaxial.
T-521AP = 5.5/2.1 мм
T-525AP = 5.5/2.5 мм
T-521J
Inline jacks for power supply,
2 poles, coaxial, with cable bending protection.
T-521J = 5.5/2.1 мм
T-525J = 5.5/2.5 мм
T-521P
Plugs for power supply,
2 poles, coaxial, with cable bending protection.
T-521P = 5.5/2.1 мм
T-525P = 5.5/2.5 мм
T-525AP
Plugs for power supply, right-angle,
2 poles, coaxial.
T-521AP = 5.5/2.1 мм
T-525AP = 5.5/2.5 мм
T-525J
Inline jacks for power supply,
2 poles, coaxial, with cable bending protection.
T-521J = 5.5/2.1 мм
T-525J = 5.5/2.5 мм
T-525P
Plugs for power supply,
2 poles, coaxial, with cable bending protection.
T-521P = 5.5/2.1 мм
T-525P = 5.5/2.5 мм
TBS-2/GO
Gold-Plated Screw Terminals
For PCB mounting, current rating: up to 10 A per contact, suitable for signal voltages and safety extra-low voltages (SELV).
TBS-4/GO
Gold-Plated Screw Terminals
For PCB mounting, current rating: up to 10 A per contact, suitable for signal voltages and safety extra-low voltages (SELV).
TBS-6/GO
Gold-Plated Screw Terminals
For PCB mounting, current rating: up to 10 A per contact, suitable for signal voltages and safety extra-low voltages (SELV).
Заказать обратный звонок
Оставьте ваш телефон и мы Вам перезвоним
Обратный звонок осуществляется только на телефоны местной телефонной сети.